http://www.murata.com/ data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s specifications are subject t o change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before ordering. 1 o this data sheet is applied for chip emifil r used for general electronics equipment for your design. 2009.5.1 noise suppression products/emi suppression filters > emifil r (capacitor type) > single circuit type for signal lines 0.3 0.2 (1) (3) (2) (2) 1.25 0.1 2.0 0.2 0.6 0.2 0.85 0.1 +0.2 ? 0.1 0.2 (in mm) : electrode 1 10 100 1000 0 20 40 60 2000 80 100 frequency (mhz) (50 ? - 50 ? ) nfm21cc101u1h3 nfm21cc470u1h3 nfm21cc220u1h3 nfm21cc221r1h3 nfm21cc471r1h3 nfm21cc102r1h3 nfm21cc222r1h3 nfm21cc223r1h3 insertion loss (db) input (1) output (3) (2) gnd no polarity. emifil r (capacitor type) single circuit type for signal lines nfm21c series (0805 size) dimensions insertion loss characteristics (main items) equivalent circuit packaging code packaging minimum quantity d 180mm paper tape 4000 b bulk(bag) 500 rated value ( p : packaging code) part number capacitance rated current rated voltage insulation resistance (min.) operating temperature range nfm21cc220u1h3 p 22pf+20%-20% 700ma 50vdc 1000m ohm -55 c to +125 c nfm21cc470u1h3 p 47pf+20%-20% 700ma 50vdc 1000m ohm -55 c to +125 c nfm21cc101u1h3 p 100pf+20%-20% 700ma 50vdc 1000m ohm -55 c to +125 c nfm21cc221r1h3 p 220pf+20%-20% 700ma 50vdc 1000m ohm -55 c to +125 c nfm21cc471r1h3 p 470pf+20%-20% 1000ma 50vdc 1000m ohm -55 c to +125 c nfm21cc102r1h3 p 1000pf+20%-20% 1000ma 50vdc 1000m ohm -55 c to +125 c nfm21cc222r1h3 p 2200pf+20%-20% 1000ma 50vdc 1000m ohm -55 c to +125 c nfm21cc223r1h3 p 22000pf+20%-20% 2000ma 50vdc 1000m ohm -55 c to +125 c number of circuit: 1 continued on the following page.
continued from the preceding page. http://www.murata.com/ data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s specifications are subject t o change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before ordering. 2 o this data sheet is applied for chip emifil r used for general electronics equipment for your design. 2009.5.1 noise suppression products/emi suppression filters > emifil r (capacitor type) > single circuit type for signal lines ! caution (rating) do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. notice solderability of tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the tin melting point is used. please confirm the solderability of tin plating termination chip before use. ! caution/notice
|
